SEE TEST TABLE

Lab Test

Key Standard

Full Name of Standard Used

1.
NMX-E-004-NYCE-2020 Method A

Plastics industry – Determination of non-cellular plastic material density – Testing methods

2.
NMX-E-013-CNCP-2015

Plastics industry – Determination of resistance to internal hydraulic pressure in pipe and fittings – Testing methods

3.
NMX-E-014-CNCP- 2006

Plastics industry – Resistance to flattening of pipes and fittings – Testing methods

4.
NMX-E-015-CNCP-2005

Plastics industry – Resistance to acetone in poly(vinyl chloride) (PVC) pipe without plasticizers – Testing methods

5.
NMX-016-CNCP-2016

Plastics industry - Resistance to pressure, Testing methods

6.
NMX-E-021-CNCP-2006

Plastics industry – Dimensions in pipes and fittings – Testing methods

7.
NMX-E-025-CNCP-2005

Plastics industry – Pipes and fittings – Flammability of plastics– Testing methods

8.
NMX-E-029-CNCP-2009

Plastics industry – Resistance to impacts in pipes and fittings – Testing methods

9.
NMX-E-034-CNCP-2014 B Method

Plastics industry – Carbon black content in polyolefin – Testing methods

10.
NMX-E-061-CNCP-2015

Plastics industry – Dispersion of carbon black in polyolefin – Testing methods

11.
NMX-E-129-SCFI-2001

Plastics industry – Pipe and fittings – Joint seal of spigot-bell end union in poly(vinyl chloride) (PVC) pipes and fittings without plasticizer – Testing methods

12.
NMX-E-131-NYCE-2020

Plastics industry – Resistance methylene chloride in poly(vinyl chloride) (PVC) pipes without plasticizer – Testing methods

13.
NMX-E-179-NYCE-2020

Plastics industry – Longitudinal reversion – Testing methods

14.
NMX-E-205-CNCP-2011

Plastics industry – Leakage of union for plastic pipes with elastomer O-ring material – Testing methods

15.
NMX-E-208-CNCP-2015

Plastics industry – Determination of plastic pipes characteristics under external load through parallel plates – Testing methods

16.
NMX-E-213-NYCE-2020

Plastics industry – Vicat softening temperature – Testing methods

17.
NMX-E-214-NYCE-2019

Plastics industry – Determination of resistance to external blows - Round the clock method – Testing methods

18.
NMX-E-143/1-CNCP-2011 Subsection 8.1

Plastics industry – Poly(vinyl chloride) (PVC) pipes with out plasticizer utilized in pressurized water supply systems –
Specifications and testing methods
Short-term leakage under internal hydrostatic pressure.

19.
NMX-E-143/1-CNCP-2011 Subsection 8.2

Plastics industry – Poly(vinyl chloride) (PVC) pipes with out plasticizer utilized in pressurized water storage systems – Specifications and testing methods
Short-term leakage under negative air pressure

20.
NMX-E-143/1-CNCP-2011 Subsection 8.3

Plastics industry – Poly(vinyl chloride) (PVC) pipes with out plasticizer utilized in pressurized water storage systems –
Specifications and testing methods
Long-term leakage under internal hydrostatic pressure

21.
NMX-E-241-CNCP-2011 Subsection7.2

Plastics industry – High Density Polyethylene (HDPE) pipes with corrugated wall and elastomer O-ring seal material – Specifications and testing methods. Utilized in sanitary sewer systems – Imperial series -Specifications and testing methods
Yield relationship

22.
NMX-E-241-CNCP-2013 Subsection7.3

Plastics industry – High Density Polyethylene (HDPE) pipes with corrugated wall and elastomer O-ring seal material – Specifications and testing methods. Utilized in sanitary sewer systems -
Imperial series –
Specifications and testing methods
Resistance to heat (oven test)

23.
NMX-E-241-CNCP-2013 Subsection7.4

Plastics industry – High Density Polyethylene (HDPE) pipes with corrugated wall and elastomer O-ring seal material – Specifications and testing methods. Utilized in sanitary sewer systems – Imperial series -
Specifications and testing methods
Resistance to combined cycle of temperature under load

24.
NMX-E-135-NYCE-2020

Plastic industry -Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastic – Testing methods

25.
NMX-E-266-CNCP-2016

Plastic industry – Determination of creep relation – Testing methods

26.
NMX-E-262-CNCP-2016 A and B method

Plastic industry – Resistance to combined cycle of external load and temperature – Test method.

27.
NMX-E-082-NYCE-2020

Plastic industry – Determination of tensile properties - Testing methods

28.
NMX-E-183-CNCP-2010

Plastic industry - Resistance to flexural modulus - Testing methods.

29.
NMX-E-184-SCFI-2003

Plastic industry – Resistance to crack growth such as ethylene -based plastics - Testing methods.

30.
NMX-E-186-SCFI-2000

Plastic industry – Pipes and fittings - Izod impact strength of rigid materials – Trial method.

31.
NMX-J-070-ANCE-2014

Pipes and connections – Deflection temperature under load – Test method.

32.
NOM-001-CONAGUA-2011 Subsection: 6.2.7.5

Potable water, residential connection, and sanitary sewer systems – Hermetic seal –
Specifications and testing methods
Resistance to pressure

33.
NOM-001-CONAGUA-2011 Subsection: 6.2.7.6

Potable water, residential connection, and sanitary sewer systems
– Joint seal – Specifications and testing methods
Compatibility of unions and connections of elements

34.
NOM-001-CONAGUA-2011 Subsection: 6.2.7.7.1

Potable water, residential connection, and sanitary sewer systems – Hermetic seal –
Specifications and testing methods
Lifespan for plastic elements

35.
ISO 9080:2012

Plastics piping and ducting systems - Determination of the long -term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.